SP14CAT50 New Device!!

50m HDMI 2.0b (18gbps) 1x4 HDMI Splitter on category cable

The SP14CAT50 is an18gbps 4K/UHD Splitter 1 to 4 HDMI splitter over category cable.  The SP14CAT50 supports HDCP 2.2/1.4 and is a solution for splitting a single HDMI input to four HDMI outputs where you need to send the output over distance.  The receivers are powered by the TX, compact (about the footprint of a credit card).  EDID can be managed from the TX with the ability to copy or use EDID from the integrated EDID library.  The SP14CAT50 is rated at 50m at 4K and 70m at 1080p while supporting the all latest features of the most advanced HDMI 2.0b signals including HDR8/10/10+ and Dolby Vision.  IR from the RX devices are returned to the TX for source control.  The technology used is also very efficient, this device only draws 14W.

SP14CAT50
TX Angle
TX Front
SP14CAT502
TX Rear higher view
TX Rear
TX EDID Switch Side
RX HDMI End
RX Side view
RX Cat End
Screenshot 2021-02-15 180920

Features & Benefits:

  • Compliant with HDMI2.0, HDCP2.2 and DVI 1.0

  • Supports video formats up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2, and up to 4k2k@60Hz with 12bit YCBCR 4:4:4

  • Supports HDR8/10/10+ and Dolby Vision

  • EDID can be copied or can be circumvented by using EDID files from the EDID library in the TX device

  • Link and signal lights on the TX/RX for easy trouble shooting

  • Supports high resolution VESA mode video format up to QSXGA@60Hz

  • Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio

  • Highly efficient/low power consumption (14W)

  • 3-Year Warranty

Specifications:​​

Specifications subject to change.

Additional HDMI Splitters: