EXARC
4K HDMI 40m/131 ft. on Cat6/Cat 5e 18Gbps extender
​
The EXARC 18Gbps HDMI Extender is a device which can extend your HDMI signal over 230t/70meters to a compatible 1080p display, 131ft/40meters to a HDMI 2.0b 18gbps compatible display. The EXARC supports HDR8/10/10+ and Dolby Vision as well as the entire HDMI 2.0b standard. The multifunction ARC/Audio feature makes the EXARC great when you need to bring audio back to the TX/Rack from the display. The ARC or S/PDIF [optical] can be output at the TX via the HDMI cable (ARC) or via the S/PDIF [optical] output. It also supports Bidirectional 12V Infrared control and RS232.
​
Primary Use: Extending HDMI AV signals along with control, ARC or S/PDIF return from display over a single Category cable.
Features & Benefits:
​​
-
HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant
-
Video resolutions up to 4K2K@50/60Hz (YUV444)
-
HDR8/10/10+ (High Dynamic Range) pass through
-
Dolby Vision™ pass through
-
Supports ARC or S/PDIF return from display to TX/Rack via HDMI and/or optical S/PDIF
-
Supports HDMI High Bit Rate(HBR) audio pass through
-
Supports Dolby+, Atmos and DTS-X
-
Supports CEC
-
Two way POE, either the TX or the RX can be powered to power the other end device (only one supply is needed)
-
12V Bidirectional Infrared control signal together with the HDMI signal.
-
Transfers Bidirectional RS232 control signal together with the HDMI signal.
-
Transmission distance: Over CAT6 cable
-
70 meters/230ft.
-
1080P @60Hz36bit; 3D1080P@30Hz36bit;
-
-
40 meters/131ft.
-
4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)
-
-
Specifications:​​