top of page
MX44KT 

Scaling 50m 4K 4x4 HDMI Matrix Kit over CAT5e/6/7

​

The MX44KT is a Scaling HDMI 2.0b HDBaseT 18Gbpsgbps 4x4 HDMI Matrix with included 70m HDMI 1080p (50m 4K) over category cable receivers. This matrix switch features simultaneous CAT5e/6/7 and HDMI outputs connects four HDMI sources up to eight displays (two mirrored per output channel). Each output can scale independently.  Output 1 can be one resolution without affecting the resolution of the other outputs.  The MX44KT supports the transmission  4Kx2K@60Hz (4:4:4), and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Atmos and DTS-HD Master Audio. The compact receivers included in this kit will extend the HDMI signal up to 230ft/70m (1080p) or 165ft/50m(4K) for multi-room connectivity.  This matrix also supports HDR8/10/10+/DolbyVisiontm (HDMI output only, category output supports up to HDR10+).  Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP or by using the selection buttons on the front panel. The innovative web GUI can be used to set scaling, and EDID settings for easy setup.

MX44KT QS
Group
Front Trans
Front Trans 2
Rear Transparent 2
Rear Angle 2 Trans
Combo Trans
RX HDMI end Trans
RX Cat end Angle
RX 1 Trans
RX Cat end Trans
GUI Splash Screen
GUI Status
MX44KT GUI Video Screen
MX44KT GUI Input Screen
MX44KT GUI Output Screen
MX44KT GUI CEC Screen
MX44KT GUI Network Screen
MX44KT GUI System Screen

Hercules Set-Up Utility by HW Group

Screenshot 2023-02-24 062932.jpg

Features & Benefits:

​​

  • Supports  RGB, YCbCr 4:4:4, YCBCr 4:2:2 and xvYCC video formats with deep color 

  • Supports video format up to 4k2k@30Hz with 24bit RGB/YCBCR 4:4:4/YCBCR 4:2:2, and up to 4k2k@60Hz with 12bit YCBCR 4:2:0 

    • Supports HDR8/10/10+/DolbyVision pass through (DolbyVision is only on HDMI output, not the UTP)

  • Auto Scaling on each channel to eliminate unlike resolutions from affecting the resolutions of superior displays

  • Supports high resolution VESA mode video format up to QSXGA@60Hz 

  • Supports reception of any audio data conforming to the HDMI specification such PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS, Dolby+, Atmos, & DTS-X

  • Supports transmission distances up to 230ft/70m @1080p and 165ft/50m @ 4K through CAT5e/6/7 cable 

  • LED's at Matrix and RX indicate connection quality of HDMI and category cable connections.

  • RX Devices are powered by the matrix.

  • Supports wideband IR (30-60Khz), IR transport from RX to matrix can control both the matrix and the sources.

  • Support simultaneous category and HDMI outputs that scale together by channel 

  • Support RS-232, remote control, on-panel control and TCP/IP Control 

  • Support smart EDID management with live function via innovative web GUI

  • 3-Year Warranty

Specifications:​​

Specifications subject to change.

Additional HDMI/HDBaseT Matrices Products:

​​

bottom of page