M66KT
6x6 HDMI Matrix switch and Receivers (Kit)
​
The M66KT HDMI Matrix kit features six HDMI inputs, Four 18gbps HDBaseT outputs (RX Devices Included) and two HDMI outputs. It provides true matrix routing for HDMI signals. It supports transmission of video (resolutions up to 2160p@60Hz Ultra HD 4:4:4) and supports high resolution audio formats such as LPCM7.1, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio. The M66KT will also pass HDR 8/10/10+ High Dynamic Range information as well as Dolby Vision. HDMI sources such as Blu-Ray players, Set-Top boxes, & etc. are routed to any output via HDMI or via the 40m category cable output to a RX device. Any source is accessible to any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP (via third party control) or the selection buttons on the front panel. This device also supports all HDMI 3D formats.
Drivers
Features & Benefits:
​​
-
HDMI2.0, HDCP2.2/HDCP1.4 compliant
-
Supports video formats up to 4k2k@60Hz with 24bit RGB/YCbCr 4:4:4YCbCr4:2:2, and up to 4k2k@60Hz with 12bit YCbCr 4:2:0
-
Supports RGB, YCbCr 4:4:4, YCbCr 4:2:2 and xvYCC video formats
-
70m 1080p transmission via Category 6 cable, 40m 4K transmission via Category 6 cable
-
18 input, 12 output Audio matrix supporting ARC
-
Supports HDR8/10/10+ and Dolby Vision
-
Fully independent audio matrix incorporates level control and lip sync functions
-
Supports high resolution VESA mode video formats up to QSXGA@60Hz
-
Audio formats supported: PCM up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS, Dolby TrueHD, Atmos, 7.1, and 5.1 formats
-
Simultaneous HDMI, Coax (SPDIF), and L/R outputs
-
Smart EDID management
-
Control of the M66KT can be accomplished via IR Remote Control, on-panel control, RS232, and TCP/IPControl (RS232 and IP for third party control)
Specifications:​​
Specifications subject to change.