M44
4x4 HDMI Matrix Switch
​
The M44 HDMI 4x4 matrix switch features four HDMI inputs and four HDMI outputs. It provides true matrix routing for HDMI signals. It supports the transmission of video (resolutions up to 2160p@60Hz Ultra HD 4:4:4) and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. The M44 will also pass HDR8/10/10+ High Dynamic Range information as well as Dolby Vision. Each output includes a 3.5mm mini and Coaxial S/PDIF audio breakout. HDMI sources such as Blu-Ray players, Set-Top boxes, & etc. are routed to any output. Any source is accessible to any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP (via third-party control) or the selection buttons on the front panel. This device supports all HDMI 3D formats.
​
Primary Use: Up to 4 sources HDMI 4K AV distribution to up to 4 displays
Drivers
Features & Benefits:
​​
-
HDMI2.0, HDCP2.2/HDCP1.4 compliant
-
Supports video formats up to 4k2k@60Hz with 24bit RGB/YCbCr 4:4:4/YCbCr 4:2:2, and up to 4k2k@60Hz with 12bit YCBCR 4:2:0
-
Supports: RGB, YCbCr4:4:4, YCbCr4:2:2 and xvYCC video formats
-
Supports all HDMI 3D formats up to 2160p@30
-
Supports HDR8/10/10+ and Dolby Vision™
-
Supports high resolution VESA mode video format up to QSXGA@60Hz
-
Audio Formats supported: PCM up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS, Dolby TrueHD, Atmos, 7.1, & 5.1 formats
-
Simultaneous HDMI, Coax, and L/R audio outputs
-
Smart EDID management allows you to change EDID "live"
-
Control of the M44 can be accomplished by IR remote control, on-panel control, RS232, and TCP/IP Control (RS232 and IP for third-party control)