top of page

4K HDMI 70m/230 ft. on Cat6/Cat 5e 18Gbps extender

The EX2 18Gbps HDMI Extender is a device which can extend your HDMI signal over 330ft/100meters to a compatible 1080p display, 230ft/70meters to a HDMI 2.0b 18gbps compatible display. The EX2 supports HDR8/10/10+ and Dolby Vision as well as the entire HDMI 2.0b standard.  It also supports Bidirectional Infrared control, RS232, & 100 BaseT Ethernet together with the 18gbps HDMI 2.0b signal.  

Primary Use: Extending HDMI AV signals along with control and Ethernet over a single Category cable.

ex2 angled

Features & Benefits:

  • HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant

  • Video resolutions up to 4K2K@50/60Hz (YUV444)

  • HDR8/10/10+ (High Dynamic Range) pass through

  • Dolby Vision™ pass through

  • Supports HDMI High Bit Rate(HBR) audio pass through

  • Supports CEC bypass

  • Two way POE, either the TX or the RX can be powered to power the other end device (only one supply is needed)

  • 100 BaseT Ethernet pass through

  • Bidirectional Infrared control signal together with the HDMI signal. 

  • Transfer Bidirectional RS232 control signal together with the HDMI signal. 

  • Transmission distance: Over CAT6 cable

    • 100 meters:

      • 1080P @60Hz36bit; 3D1080P@30Hz36bit;

    • 70 meters:

      • 1080P @60Hz@48bit; 1080P @120Hz@24bit; 

      • 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.

      • 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)

  • 3-Year Warranty


Specifications subject to change.

bottom of page